Adefemi Kila

Adefemi Kila (an haife shi 14 Disamba 1945) ɗan siyasan Najeriya ne kuma injiniya wanda ya yi aiki a Majalisar Dattawa, mai wakiltar Ekiti ta Tsakiya a cikin Afrilu 2007 bayan ya yi aiki da Julius Berger Nigerian Plc na tsawon shekaru 30 a matsayin injiniyan farar hula kuma a matsayin manajan fasaha (hukuma) shekaru 18. A halin yanzu mamba ne na council member of Standards Organisation of Nigeria SON.. Shi Kirista ne mai sadaukarwa na cocin Anglican na Najeriya.

Adefemi Kila
mamba a majalisar dattijai ta Najeriya 5 ga Yuni, 2007 - 6 ga Yuni, 2011 ← Festus Olabode Ola - Fatimat Olufunke Raji-Rasaki → District: Ekiti central mamba a majalisar dattijai ta Najeriya
Rayuwa
Haihuwa	14 Disamba 1945 (78 shekaru)
ƙasa	Najeriya
Ƙabila	Yaren Yarbawa
Harshen uwa	Yarbanci
Karatu
Makaranta	University of Wales (en)
Harsuna	Turanci Yarbanci Pidgin na Najeriya
Sana'a
Sana'a	ɗan siyasa
Imani
Jam'iyar siyasa	Peoples Democratic Party

Sen Adefemi Kila & Sen Fatimat Olufunke Raji-Rasaki

Sen Adefemi Kila da tsohon gwamnan Adamawa, Murtala Nyako a wani taro a jihar Ekiti

Tsohon shugaban kasa Yakubu Gowon da Sanata Adefemi Kila a wani taron coci a Jos

Engr Adefemi Kila tare da tsohon shugaban kamfanin Julius Berger (kamfanin) Mr Mark a karshen taron kamfanin.

Shugaba Olusegun Obasanjo tare da Sanata Kila

Tarihin Rayuwarsa

Ya halarci Cibiyar Kimiyya da Fasaha ta Jami'ar Wales (yanzu Jami'ar Cardiff ) a cikin 1970, kuma ya sami digirin digirgir a aikin injiniya na jama'a kuma an ba shi digiri na girmamawa (PhD a harkokin kasuwanci) na Jami'ar Bradley. Lacey, Washington, DC, Amurka, Afrilu 2002.

Ya fara aikinsa na injiniya tare da kamfanin injiniyoyin gine-gine - Andrew Scott a cikin 1974 da kamfanin injiniyoyi masu ba da shawara - LH. Dobbie da abokan hulda a 1975 kafin ya shiga Julius Berger Nigeria Plc a 1976 zuwa 2007 kuma an kara masa girma zuwa matsayin manajan fasaha a 1986, mukamin da ya rike tsawon shekaru 18 kafin ya yi ritaya.

Ya zama mamba a hukumar kula da ayyukan yi ta kasa (NDE) a shekarar 1987. Shi dan majalisar zartarwa ne na kungiyar Injiniya ta Najeriya (NSE); Ya wakilci NSE a 2014 CONFAB. Daga nan ya zama darakta, National Road Federation (NRF) da kuma babban kwamitin gudanarwa na hukumar kula da hanyoyin kasa da kasa (IRF), Washington, DC, Amurka, mai wakiltar Nigerian Road Federation (NRF) da gwamnatin tarayyar Najeriya. Har ila yau, mamba ne a kwamitin amintattu na gidauniyar ‘yan Nijeriya da Amurka, dake Miami, Florida, Amurka.

Shi ne shugaban kungiyar masana'antar gine-gine (FOCI) http://www.foci.org.ng/about/ Archived 2018-06-18 at the Wayback Machine, (Tsohon Ƙungiyar Ƙwararrun Ƙwararru a Nijeriya. (FOBACEC) Mayu 1996 - 2001. Ya kuma zama mataimakin shugaban COREN (Council for Regulation of Engineering in Nigeria http://www.coren.gov.ng/ ). Ya kasance shugabana na farko, Senior Staff Consultative Association of Nigeria (SESCAN) a yanzu Trade Union Congress (TUC). A halin yanzu shi memba ne na Majalisar Save Democracy Africa (SDA).

Majalisar dattawa

Cif Kila tare da shugaban kasa Muhammadu Buhari (sai kuma shugaban zartarwa na Asusun Amincewar Man Fetur)

An zabi Adefemi Kila dan majalisar dattijai mai wakiltar mazabar Ekiti ta tsakiya kuma ya kasance memba na manyan kwamitoci a lokacin da ya samu gagarumar nasara a matsayin mataimakin shugaban kwamitin ayyuka na majalisar dattawa; a wannan lokacin ya taimaka wajen ganin an kammala aikin gadar Sango Ota da aka dade ana watsi da ita; Haka kuma titin ita-awure efon iwaraja har yanzu an yi watsi da shi sama da shekaru 30. Ya kuma taka rawa wajen daidaita rigingimun filaye da dama a babban birnin tarayya a lokacin da yake zama dan kwamitin ayyuka na majalisar dattawa. Ya kuma kasance shugaban kwamitin ayyuka a shiyyar Arewa ta tsakiya da kuma Kudu-maso-Yamma.

Mukaman da ya rike a majalisar dattawa

• Mataimakin shugaban kwamitin ayyuka na majalisar dattawa. Sakamakon haka, shugaban kwamitin kula da kula da tituna na tarayya (FERMA)
• Memba, Kwamitin Majalisar Dattawa kan Jiha da Kananan Hukumomi.
• Kwamitin Majalisar Dattijai kan Harkar Ma'adinai
• Wakilin Kwamitin Majalisar Dattawa a FCT
• Kwamitin Majalisar Dattawa kan Man Fetur na Sama
• Kwamitin Majalisar Dattijai mai kula da kwayoyi, kwayoyi da yaki da rashawa
• Kwamitin Majalisar Dattijai kan Samar da Sirri
• Kwamitin Majalisar Dattijai kan katin shaida da yawan jama'a na kasa
• Kwamitin Majalisar Dattijai kan Bitar Tsarin Mulki

Ayyukansa a zauren Majalisar Dattawa

• Kwamitin Majalisar Dattijai don binciken Bayar da Filayen FCT da koke 1999-2007.
• Kwamitin majalisar dattawa don tantance shugaban hukumar EFCC.
• Kwamitin Majalisar Dattijai don tantance Cif EF Shonekan da wasu mambobi 6 na Hukumar Samar da kayayyakin more rayuwa (ICRC)
• Tawagar majalisar dattijai zuwa yankin Bakassi kafin mikawa Kamaru.
• Memba, Kwamitin Haɗin Kan Bitar Kundin Tsarin Mulki na 1999

Karramawa da lambar yabo yayin da yake Majalisar Dattawa

Wasu daga cikin lambobin yabo da aka samu sakamakon irin gudunmawar da ya bayar wajen ci gaban kasa a lokacin da yake majalisar dattawa sun hada da:

Kwarewarsa

A fagen ƙwararru, Kila ɗan'uwan cibiyoyi ne daban-daban, gami da:

Ayyukan Daya jagoranta

Kila ya fara aikin injiniyan Najeriya ne a Julius Berger Nigeria Plc a cikin 1976 a Ofishin Zane-zane, yana zayyana tsarin kiyaye ruwa, manyan tushe, musamman na Apapa Wharf Extension da ayyukan gada. A shekarar 1977, ya koma I zuwa Titin Inner Ring Road na Legas, daga baya aka tura shi gadar Marina, inda shi ne ke kula da aikin tun daga gabar arewa har zuwa karshen Apongbon, Legas. Duk da haka, a karshen aikin an kara masa girma zuwa cikakken injiniyan farar hula.

A cikin 1979, an tura shi zuwa gadar Carter kuma an sanya shi mai kula da duk sassan da aka riga aka tsara da gadar tafiya ta gadar Carter. A karshen aikin, an kara masa girma zuwa babban injiniya.

A cikin 1980-1982, Kila ya kasance mai kula da gadoji na Inner Ring Road kuma yana kula da wasu gine-ginen masana'antu da hanyoyi a cikin Karamar Hukumar Legas. Bayan kammala ayyukan cikin nasara, an kara masa girma zuwa babban injiniya.

A ci gaba da aikinsa a shekarar 1982, an dora Kila a matsayin mai kula da gina gine-ginen masana'antu a fadin kasar. Saboda ayyukan da ya yi a aikin da kuma haɗe da ikonsa na gudanarwa, an ƙara masa girma zuwa mukamin manajan fasaha (hukuma) a 1986. Daga baya aka koma hedikwatarsa, inda ya dauki cikakken alhakin ayyukan gudanar da mulki, wanda ya hada da bunkasa albarkatun jama'a, horar da ma'aikata, da wakilcin kamfanoni a dukkan matakai na gwamnati, kamfanoni masu zaman kansu, ƙwararru da hukumomin duniya.

Ayyukan kungiyar kwadago

Kila ɗan ƙungiyar ƙwadago ne kuma ya jagoranci shawarwarin ƙungiyar ƙwadago da yawa masu nasara a lokacin aikinsa.

Ya kasance shugaban kamfanin Julius Berger Nigeria Plc. Ƙungiyar Manyan Ma'aikata na shekaru 7, 1979-1986.

Daga baya ya zama shugaban kungiyar manyan ma’aikatan gine-gine da injiniyoyi na kasa, 1982 – 1990, kuma ya kasance a sahun gaba wajen fafutukar ganin an aiwatar da manufar gina kasa ta Gwamnatin Tarayya.

Kila shi ne Babban shugaban Consultative Association of Nigeria (SESCAN) (now Trade Union Congress (TUC), 1985–1991).

Senior Staff Consultative Association of Nigeria (SESCAN) (yanzu Trade Union Congress (TUC), 1985-1991.

Gudanarwa

Kila hazikin manajane na kudi da kayan aiki, kuma ya samu mukamai da dama kamar:

• Council Member Standard Organisation of Nigeria (SON)
• Member of the executive board of Nigerian Society of Engineers (NSE)
• Council Member of the Nigerian Society of Engineers (NSE) and represented NSE at the 2014 CONFAB
• Board member of the National Directorate of Employment (NDE) in 1987–1988
• Director, Nigerian Road Federation (NRF)
• President, Federation of Construction Industry (FOCI), (formerly Federation of Building and Civil Engineering Contractors in Nigeria (FOBACEC) May 1996 – 2001
• Vice- President of COREN (Council for Regulation of Engineering in Nigeria)
• Pioneer President General, Senior Staff Consultative Association of Nigeria (SESCAN) now Trade Union Congress (TUC)
• Member, Executive board of directors of International Road Federation (IRF), Washington DC, USA., representing Nigerian Road Federation (NRF) and the Federal Government of Nigeria. April 1994.
• Member, Board of trustees, Nigerian-American Foundation, Miami, Fl. USA.

• iyar Najeriya-Amurka, Miami, Fl. Amurka

Addininsa

Sanata Kila mamba ne na cocin Anglican Church of Nigeria. Shi mamba ne a Cocin St. Matthew's Anglican Church Maitama, Abuja inda ya zama shugaban kwamitin tara kudade na gina coci a Mabuchi. Ya kasance memba na Cocin Saint Paul's Ishagatedo Legas kuma ya kasance a

member of FOH39Ng a society in the church. His activities in the Church made the Bishop (ADEBIYI) gave him an award of

kyakkyawan aiki ga manyan ayyukansa a cikin coci. Shi memba ne a cocin Saint Mathews Maitama, Abuja inda ake yin wasan kwaikwayo

ya samu lambar yabo ta gwaninta. Shi memba ne na Cocin Saint Paul Efon Alaaye.

immense activities rewarded him as the 'baba ijo' of the church- being his home town Church.

Controversies

In October 2008 he defended the Federal Roads Maintenance Agency in Benue State, blaming problems on poor funding. In May 2008, he was among four senators on the screening committee who appeared to be delaying the assumption of office by the nominated chairman of the Economic and Financial Crimes Commission (EFCC), Mrs. Farida Mzamber Waziri. He later lost his seat in the senate at the court of appeal to Festus Olabode Ola in 2009 after previously winning the case at the Tribunal.